Fuel Line, Brake Lines, Steering & Motor Mounts....

This weekend I was able to complete several small tasks on the frame by attaching the brake lines and fuel line (both stainless) as well as adding the steering gearbox and motor mounts.

The front brake line was proably the closest to being bent correctly, the other lines all needed some additional work to look half way decent.

The rear portion of the lines turned out quite nice and are run in the correct location from what I can tell based on the pictures I found on-line.  I still need to find the bracket to attach the brass "T" to the rearend.

Here's a nice picture showing the new quick ratio steering gearbox, motor mounts and brake lines.  It's starting to look really nice, next up are some a-arms, springs and steering components.  The good thing is that the previous owner already completed a disc brake conversion on the front so I have nearly all new SSBC components.   I also ordered the brake lines so there is a dual master and proportioning valve.